Product Features
• Touch screen + PLC to control tool gap and working process. • Servo motor + ball screw control roller to square tool gap according to plate thickness
• Each corner can be identify different inner radius according to thickness
• Forming the R angle does not require open angle welding. It only needs to pre-bend the two sides of the R angle by 90 degrees on the bending machine, and then roll and form the whole machine on this machine to automatically cut the excess edge material
• The die types are divided into bending lower die, forming roller upper die and forming lower die. The bending die is the same as the ordinary bending die, depending on the thickness of the plate. The upper die of the forming roller depends on the R angle that needs to be formed. The forming lower die is determined by the R angle of the upper die of the roller minus the thickness of the plate. A lower die has four different R angles
• The forming R angle is the same but the plate thickness is different. It is not necessary to replace the forming roller upper die and forming lower die, only to adjust the gap between the forming roller upper die and the forming lower die
Product Parameters
| Model |
CF-3050 |
| Total Power |
6KW |
| Voltage |
3Phase 4Wire 220V/380V |
| Oil Pump Power |
3.7KW 380V |
| Air Pressure |
≥0.7Mpa |
| Processing Capacity |
Material |
Plate Thickness |
Flange Height |
Corner Radius |
| Cold Rolled Steel Plate |
0.6mm |
≤10mm |
Inside:R2-R50
outside:R0.8-R49
|
| 0.8mm |
≤15mm |
| 1.0mm |
≤18mm |
| 1.2mm |
≤20mm |
| 1.5mm |
≤22mm |
| 2.0mm |
≤25mm |
| 3.0mm |
≤30mm |
| Stainless Steel |
0.8mm |
≤10mm |
| 1.0mm |
≤15mm |
| 1.5mm |
≤22mm |
| 2.0mm |
≤27mm |
| Aluminum Plate |
0.8mm |
≤15mm |
| 1.0mm |
≤18mm |
| 1.0mm |
≤22mm |
| 2.0mm |
≤25mm |
| 2.5mm |
≤28mm |
| 3.0mm |
≤30mm |
| Weight |
2600kg |
| Workpiece Size |
Minimum 200*200mm Maximum 6000*6000mm |
FAQ
1. Who are we?
A:We are based in Jiangsu, China, start from 2011,sell to Southeast Asia(20.00%),Eastern Europe(20.00%), WesternEurope(10.00%), North America(10.00%), Northern Europe(5.00%), Central America(5.00%),SouthAmerica(5.00%),Eastern Asia(5.00%),South Asia(5.00%),Oceania(5.00%),Southern Europe(5.00%),Africa(3.00%),MidEast(2.00%). There are total about 11-50 people in our office.
2.Which payment terms you can accept?
A: We can accept flexible payment include Bank Transfer, LC, DP, West Union, Paypal, or Combination terms as negotiation.
3.Which shipping way can you provide?
A: We can provide shipping by sea, by air, by express and etc according to customer requirements.
4.How to place order?
A: When you are ready to order, please contact us for confirm the suitable solution & plan & model. What cannot be ignored is you should provide a copy purchase order to ensure that your order is processed properly.
5.Do you have an inspection procedure for the product?
A: Yes, We have a strict inspection of product quality and packing.
){kind=link}